FastHit 2mm Bright Red Fibre Optic Shotgun Sight

FastHit 2mm Bright Red Fibre Optic Shotgun Sight

•100mm overall length

•Eye occlusion tube has 0.6mm low profile walls

•Eye occlusion tube is 40mm+ long

•Carbon fibre frame

•Encourages a consistent cheek weld

•Designed with feedback from top UK shooters

•Extra adhesive included

Provides a bright red dot in place of your standard bead allowing faster target acquisition.

The tunnel design forces your dominant eye to do the aiming. The dot is shielded from your non dominant eye making it comfortable to keep both eyes open whilst shooting.

Gives 40mm of tube to shield the dot from you non-dominant eye.

Universal fit with supplied 3M adhesive tape. Easy to apply. Suitable for all shotguns

For best results remove any grease from rib before application

100mm overall length. 28 mm of fibre optic rod is exposed. This is more than enough to give you a bright dot even on a cloudy day.

2mm bead size. Very slightly larger than a standard shotgun bead. If you shoot primarily close up you may prefer the 3mm version.

Fast and free postage within the UK.

Made with pride in England.

WHY A FASTHIT RED FIBRE OPTIC SHOTGUN BEAD AND NOT ANOTHER BRAND?

We have studied all the strengths and weaknesses of the competing fibre optic shotgun sights and have addressed the weaknesses over several versions with feedback from a wide variety of shooters including UKPSA and IPSC England shooters. Even so, we are still happy to take feedback and are eager to improve where we can. The issues we see with other brands are these.

- Frame Thickness– The tube occluding the weak eye should be as thin as possible in order not to obscure small or distant targets. Many poorly made sights have very thick walls. A FastHit has 0.6mm wall thickness. This thickness maintains durability whilst not rendering the sight useless for distant targets.
- Eye Occlusion Tube– The length of the tube that prevents your weak eye from seeing the dot is important. If it’s too short you will see two dots with both eyes open. The brain then has to take a fraction of a second to choose which dot to focus on. A FastHit has a tube more than 40mm long to prevent this.
- Fibre Optic Rod– The fibre optic rod needs to be of good quality. The end which is viewed needs to be as smooth as possible to give a good clarity dot. The other end must be blacked out to avoid losing 50% of the brightness and washing out the colour. Lesser brands often make all these mistakes.
- Durability– The frame must be adequately durable whilst having a good connection to the fibre optic rod inside. Losing the fibre optic out of other brands whilst shooting was the reason we started FastHit. The fibre optic will never fall out of a FastHit. If it somehow did we’d send you a replacement anyway.
- Adhesive– A FastHit sight includes spare adhesive just in case you don’t get the placement right the first time. As far as we know no other brands do this. It’s a small thing but no doubt, often appreciated.