eye dominance shotgun bead

FastHit ‘Speed’ 2mm Bright Green Shotgun Fibre Optic Shotgun Sight

•70mm overall length

•Frame has 0.6mm low profile walls

•Encourages a consistent cheek weld

•Designed with feedback from top UK shooters

•Extra adhesive included

Unlike the classic FastHit design, the Speed version has no tunnel feature so does not correct for eye dominance. This means the Speed allows your eye to pick up the glowing bead even faster than traditional fibre optic shotgun sights and the minimalist design offers an extra bright glow to the bead.

If correcting eye dominance is not a concern and you are after outright speed of sight picture this will suit your requirements.

Universal fit with supplied 3M adhesive tape. Easy to apply. Suitable for all shotguns. 70mm overall length.

Bead diameter is 2mm. This is approximately the same size as a standard metal shotgun bead. Usually more suited to smaller more distant targets. For shooting close up you may prefer a 3mm version although this is a matter of preference. Either size is usable for any activity.

All our products are designed to be tougher than similar products but at a more reasonable cost.

If you do have any problems please let us know asap.

It’s important to us you are happy with your purchase.

Fast and free postage within the UK.

Made with pride in England.

WHY A FASTHIT FIBRE OPTIC SHOTGUN SIGHT AND NOT ANOTHER BRAND?

We have studied all the strengths and weaknesses of the competing fibre optic shotgun sights. From Easyhit to shoddy knock offs and have addressed the weaknesses over several versions with feedback from a wide variety of shooters including UKPSA and IPSC England shooters. Even so, we are still happy to take feedback and are eager to improve where we can. The issues we see with other brands are these.

Frame Thickness– The tube occluding the weak eye should be as thin as possible in order not to obscure small or distant targets. Many poorly made sights have very thick walls. A FastHit has 0.6mm wall thickness. This thickness maintains durability whilst not rendering the sight useless for distant targets.
Eye Occlusion Tube– The length of the tube that prevents your weak eye from seeing the dot is important. If it’s too short you will see two dots with both eyes open. The brain then has to take a fraction of a second to choose which dot to focus on. A FastHit has a tube more than 40mm long to prevent this. The Speed model does not use an eye occlusion tube.
Fibre Optic Rod– The fibre optic rod needs to be of good quality. The end which is viewed needs to be as smooth as possible to give a good clarity dot. The other end must be blacked out to avoid losing 50% of the brightness and washing out the colour. Lesser brands often make all these mistakes.
Durability– The frame must be adequately durable whilst having a good connection to the fibre optic rod inside. This is the weak point of other brands in our experience. Losing the fibre optic out of both of other brands whilst shooting was the reason we started FastHit. The fibre optic will never fall out of a FastHit. If it somehow did we’d send you a replacement anyway.
Adhesive– A FastHit sight includes spare adhesive just in case you don’t get the placement right the first time. As far as we know no other brands do this. It’s a small thing but no doubt, often appreciated.